Basket is empty

This is how you install the
Latt-panels yourself

The unique tongue and groove connection makes it perfectly possible to install the Maestro Latt panels yourself, for both new construction and renovation. After all, you create a new, smooth and even top layer, regardless of the condition of the underlying surface. Maestro Latt is an eye-catcher that you can easily install yourself, in one day time, without cutting and breaking work.

Installation
of the panels

For mounting, you can either choose to glue the panels on top of an existing wall, or you can staple the panels to a wooden grid. The latter method has the advantage that you can remove the panels again in order to upgrade another living space with them!

 

 

 

DIMENSIONS

 

Left side (backing + slats): 20x41x2770mm
Right side (backing + slats): 20x30x2770mm

 

Latt wall panels are 277 cm high, so they cover most walls from floor to ceiling. The panels are, of course also easy to shorten to the desired height. With only 2cm thickness you have a minimal loss of space in the room.

  1. Build a wooden framework and cut thepanels to the desired size.
  2. Attach the panels with staples or with
    Maestro fastening clips.
  3. Finish with finishing profiles if necessary. 

 

OR

 

  1. Remove dirt and moisture from the walland cut the panels to the desired size.
  2. Apply adhesive to the wall and/or back of
    the Latt wall panel.
  3. Finish with finishing profiles if necessary. 

Finishing accessories

Cover moulding


 

 

30 x 120 x 2700 mm
1 pcs/pack (2,7 lm)

End profile kit

 

 

 

Left side
20 x 41 x 2770 mm  Backing + Slat